Concrete Admixture Fuluorui

Products

SNF

Naphthalene sulfonate formaldehyde condensates (SNF/NSF/PNS/UNF/FDN)

  • Appearance

    Yellowish Brown Powder

  • Solid content(%)

    >92%

  • PH Value

    7-9

  • moisture(%)

    ≤4.0

  • Sample

    Free

  • Stock Status

    Custom Order

    Product Description

    Naphthalene sulfonate formaldehyde condensates(SNF/NSF/PNS/UNF/FDN).The main raw materials of naphthalene superplasticizer are industrial naphthalene, sulfuric acid, formaldehyde and sodium hydroxide. Naphthalene series water-reducing agent products are characterized by the water reduction rate is not as high as PCE series, the general water reduction rate is less than or equal to 16%, and it is impossible to produce products with an added amount of 1.0Kg (L) /100Kg cement. SNF was the mainstream product in China 20 years ago, but if you have special needs, we can also provide you with two specifications of SNF.

    Product Type

    SNF-5 (High concentration naphthalene sulfonate water reducer) Sodium sulfate content≤5% Solid content≥91%

    SNF-18 (Medium concentration naphthalene sulfonate water reducer) Sodium sulfate content≤18% Solid content≥91%

    Formula

    The minimum content of liquid products produced by naphthalene powder water-reducing agent is 1.5Kg(L)/100Kg cement, and the admixture with slump retention time exceeding 1.5 hours cannot be produced. If it is necessary to maintain concrete with a slump of 160mm for more than 2 hours, naphthalene water reducer is difficult to do, if it is barely done, then the setting time of concrete will be extended, and there will be a great safety risk. Moreover, naphthalene sulfonate superplasticizer is difficult to produce pumped high-strength concrete above C60. If you produce C100 concrete, you can only use PCE series products, especially FRPC-02. Concrete with slump retention of more than 3 hours can only be achieved by using PCE.

    MaterialsDosage(Kg)Notes
    Formula 1Formula 2
    SNF-5/260-360The specific dosage was determined by concrete mix ratio test
    SNF-18300-420/
    sodium gluconate15-3015-30It depends on the temperature and setting time
    sucrose5-105-10It depends on the temperature and setting time
    Other special materialsIt depends on the circumstances
    air entraining agent0.6-1.00.6-1.0If there is no requirement for gas content, the lowest value can be taken
    WaterAdd water to 1000KgClean water
    The data is for reference only, and the specific formula should be determined by test.

    Technology Service

    Concrete technology, concrete admixture technology welcome consultation:

    WhatsApp:13783184240

    WeChat:FLR13783184240

    Email:[email protected]
    [email protected]

    TEL:13783184240

    Product specification

    Items Standard
    Appearance Yellowish Brown Powder
    Solid content(%) >92%
    PH Value 7-9
    moisture(%) ≤4.0
    MF (C11H7O4SNa)n
    chloride content (%) <0.5
    Surface Tension 70+/-10-3N/M

    Related Products

    All Products
    • Sodium lignosulfonate MN-12

      Sodium lignosulfonate water reducer MN-12

      Mainly as a high efficiency water reducing agent used in concrete.

      Sodium lignosulfonate MN-12

      Sodium lignosulfonate water reducer MN-12

      Mainly as a high efficiency water reducing agent used in concrete.

      Learn More

    Leave Message

    If you’d like to contact us, give us a call or you can fill out the form below and one of our representatives will contact you as soon as possible.

    Contact and consult to customize your product

    Our staff will contact you as soon as possible